Some of the best lamp film on the market - we bring it home from Italy!
Can be fitted to plastic and glass headlights.
This film is designed for high light performance.
Size 1000 x 250mm
Guide:
1: Clean the lens.
There must NOT be any dirt or grease on them.
You can use different cleaning products. We recommend glass cleaner.
2: Make sure the surface is dry
3: Apply the foil carefully and loosely. BUT do not press it hard.
4: You can move the foil just as gently to place it correctly.
5: When you have found the right position, press in the middle and push your finger or spatula out to the edge. This way you won't get air bubbles.
6: Let the glue work at least 12 hours.
7: After 12 hours the glue is dry and it can withstand all kinds of weather.
NOTE: When installing the light and room temperature must be at least be 15degrees.
High pressure cleaner must not be used on the sticker. But a soft brush does nothing.
It can be easily removed again and does not damage the lamp...
If the foil needs to be removed, we recommend using a heat gun.